What do you do if you raise your garage door using the opener, nevertheless when it's time and energy to put it back down, it will not budge? If you're headed out for a day at work, you obviously don't want to leave everything available to ensure that thieves can steal whatever you've got stored. Maybe you have someone you can call for help, but a straight better solution would be to learn What to do if garage doors can't close. By following the steps outlined in this information, you can fix the problem yourself. It's all in knowing what to appear for.
The likely culprit, if you have a home opener which was produced after January 1, 1993, lies in the mandatory safety sensor auto reversing system. Have a look at your door to discover both sensors. You'll locate them about 4-6" from a floor of the garage. They have been put there to shield the closing of the doorway so that it can't shut down and injure someone who's in its path. If the sensors aren't working properly, your opener light may flash repeatedly, and the doorway won't close whenever you tell it to. Instead, you will need to Open garage door manually using steady strain on the wall-mounted button.
There are several things you can certainly do as preventive maintenance prior to having issues together with your door not closing. Be sure that you keep all debris cleared from the eyes of one's sensors. They'll not work effectively if such items as dirt, leaves, or trash are obscuring the lens. You may also be sure that both sensors have an indicator light which gives off a steady glow. If both of them are glowing or one flickers, it's possible that they might be a bit out of alignment.
The 2 sensors serve different functions. One of them receives information from the other with a beam. To test and see if misalignment is the issue, block the sensors so they aren't in a position to "see" each other. When this is completed, the light on among the sensors will shut down for a brief period of time. That informs you that here is the receiving sensor. Loosen the bracket on the back of the receiver, and you'll have the ability to adjust it and so the light produces a steady glow which informs you the sensor is back where it will be. If this simple fix doesn't correct your problem, you could have a loose wire or a short in the system. For most of us, this implies calling in an expert to obtain the short and fix the connection.
Comments